TV I can't get any sound output from the SR6300 when taking the audio out from a motorola cable receiver to the SR6300 DSS audio input or TV input jacks. Any suggestions? check the fuse output line in
...TV to a Marantz SR 7000. Output from the Marantz needs to be analog. Previously the output from the Marantz was digital. how do i make this configuration change on the Marantz? Refer its user manual ...
Question about Sr8200 Thx Ex Surround Dolby Digital Receiver Dts Sr 8200
...output. Using Direct TV. Having problems getting connectivity. Currently going from direct tv to television set using hdmi, but can't get audio from Direct tv to marrantz sr8200.. Does you tv ...
Question about SR-6200 Receiver
...how i connect blu ray to 7channel input to my receiver? Connect the Blueray player to the HDMI input of the TV. Use the TV's audio output to the receiver. You cannot do 7.1 using analog
Question about SR7002 6.1 Channels Receiver
...TV and the same thing happens. So in my opinion I have isolated the problem to the receiver's HDMI1 output. The unit is about 6 years old. So what is my next move? Try a new HDMI cable. Digital ...
...tuner, CD etc on the Marantz. If your TV doesn't have separate RCA outputs use a 'scart to RCA audio outputs' adaptor... TVs have a standard line output level compatible with most if not all
Question about SR7002 6.1 Channels Receiver
...output from tv does not seem to be outputting anything during the marantz sound configuration (audyssey setup) The Audyssey setup does not use any audio from the TV. Audyssey is started automatically ...
output on the TV to an optical input on the TV. When watching antenna TV, select the input on the 6006 that the optical cable is connected to. You may have to play with settings in the TV and the 6006
How do i connect marantz rs2252. To tv Do you have an audio out or headphone jack on the TV? If not you'll need a digital TV tuner converter box that does. If you remember, these are the "digital ...
Question about SR6001
...you have your tv hooked up via hdmi, then you will not be able to get the audio to sync up with it. the tv takes longer to decode and display an hdmi output than your receiver does for an audio
Usually answered in minutes!
59 Questions
46 Questions
28 Questions
36 Questions
35 Questions