Questions & Answers for: Ford track problems

you tried cleaning the contacts on the door that happened to me too and when i really looked at the track for the door there was one of the kids socks stuck in there in the way back of the track now i

...same problem with a newer Taurus so we took off the door panel and found the window was out of its track - temporarily we filled the track with "THE RIGHT STUFF" gasket maker made by Permatex (sold ...

... is that the solenoid or the motor? and if so is there anyway to close it? you either have motor or track damaged, you can manually close it with an ALLEN wrench as outlined in your owners manual, ...

...in design...Ther are all on the roof...and exposed to rain, dirt, dust, etc. etc. Your sliding tracks are probably clogged with the above mentioned and are causing a binding in the track sleeves ...

...The common problems with those is the regulator is worned and need replacing. regulator is a window track, it keep the window in it track and when it become worned it get sloppy. hope that help ...

...motors be bad? Had this same issue with my 2004 Expedition. I removed the seat, seat motor and seat track. I tested the motor by plugging back in but without the track and was spinning freely. Took ...

problems. or B: the glass has come off of the track inside the door and is no longer in contact with the motor and carrier. The simplest way to check is to try to run the window up and down and listen

1999 ford windstar. Drivers seat will move about 1 inch. dont see anything in the tracks. What is the problem? Check the track closely as Ford uses these little plactic end caps for the tracks and ...

i lights , skidding car with tracks light up, message indicates engine malfunction When you restart car, the engine malfunction message goes away but the lit up bold i and skidding car + tracks stays ...

...go back up. What is the most likely cause of this? have not tried anything yet. The window scissor track probably just needs to be cleaned and lubricated. The motor automatically shuts off if the ...