Questions & Answers for: Frigidaire sw control

Question about ATF6000ES Front Load Washer

5 Answers

SW ASSY AND RUN ONE IM VERY SURE THIS WILL TAKE CARE OF YOUR SITUATION ;NOW GET ON YOUR KNEES , GET DIRTY AND HAVE A GREAT DAY! MAYITOJHONES list of codes is behind bottom panel on tech sheet attached

Ad

Question about FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

...control panel.... where is this? how do i find it? there don't appear to be any fuses that i can see and i don't see anything listed in the manual. thanks again, sw To get at the fuse, you probably ...

Ad

Question about FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

...what should i do? replace the main control as it has failed . the new one is improved .. mm feed back pls replace the sw membrain and the electronic control .. mm hope this helps .. feed back ...

Question about FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

SW France, This is probably a failed hot water control valve as its physical fail/no power position is closed. It could be wiring to it or from the control PCB. Whichever- service call ;-0( Good luck,

Question about FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

...SW France, This is symptomatic of a malfunctioning water control valve- the hot water one, if the washer is hot and cold fill, and the cold one if it is just cold fill! Sorry but it needs replacing ...

Question about FGF337EC Stainless Steel Gas Kitchen Range

1 Answer

SW France, Providing that the water taps are turned on and there are no kinks in the hoses and they are not squashed, this is symptomatic of a malfunctioning water control valve- the hot water one, if

...SW France, This is symptomatic of a malfunctioning cold water control valve. Sorry, either it needs replacing and/or a service call to confirm that it is not something else like the control board not ...

Question about ATF6000ES Front Load Washer

1 Answer

...control board. Check motor and it is ok, only pulling 10amps. What else could it be. Hi from retired Englishman in SW France, Sorry but with such a fault it is extremely difficult for anybody on this ...

Question about GLEFS77C Electric Kitchen Range

1 Answer

...control board betwwen BK and L2 out, BRL and L2 out with the oven/broiler on and ther was no voltage, L2 in to ground it showed 16 volts and L2 out to L2 in showed 236 volts. Lock sw, speed bake sw, ...

Question about ATF8000F Front Load Washer

1 Answer

...SW France, Just in case it is waiting for water- If you have checked that the hot and cold water taps are turned on fully and the hoses are not kinked or squashed at the back, it is worth while ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machine Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...