Questions & Answers for: Maytag supco rco810

...clicking you hear is from the compressor, you need to remove the relay and overload and install a Supco URCO410 relay/overload/capacitor assembly. The instructions are on the package. **Make sure ...

...good to go. thanks te appliance doc rate me please I replaced all the factory components with a supco 4 in 1. This fridge has a run relay and you must use the the supco part that has a the run

...is supplying 120VAC to the compressor, then have a qualified service technician install a Supco URCO410 relay/capacitor/overload kit on the compressor. As with any sealed refrigeration ...

...to make. If you are sure the thermostat is supplying 120VAC to the compressor, you can install a Supco URCO410 relay/capacitor/overload kit. This part should only be installed by a qualified ...

...it determined that power is reaching the compressor, the windings are ok, a 3 in1 hard start kit (Supco URCO210) can be installed by a qualified service

...availible for this product. Be sure the problem is not just the start relay and overload. Buy a SUPCO URCO41 from an appliance parts distributor (www.marcone.com) for about $25.00. The ...

Compressor problem, installing the Supco 3-in-1 Relay My compressor quit, and unfortunately the serviceman who worked on it was not quite "up to speed." He installed the Supco RC0810, which worked for

seconds, you will need to replace the part. The bast thing to do is replace all three pieces with a Supco 3 in 1. You can search Supco 3 in 1 and find one on the web. If you can use a meter, you might

not cooling either side. compressor not running Most likely you will need a Supco 3 in 1. It's a capasitor, relay and overload assy. You can buy the exact replacment at ...

...M1TXEGMY is not working properly We notice items in... If you can find a part called URCO810 Supco it replaces all the compressor start parts or contact me I have them for much less that these ...