Questions & Answers for: Akai stk output

RED TIMER LIGHT BLINKS AND WILL NOT POWER UP HELP Open back of TV, there will be two STK's (black boxes) unplug the harness connector from the power supply into the stk board and turn on. If you get ...

need link and part number for STK-IC for AKAI PT4298 HD rear project convergence fix Please provide us with a link for the replacement part(s) and part number for STK-IC for AKAI PT4298 HD rear ...

...and color is distorted. What could be wrong with it? hey my friend replace the convergence ic's (stk.....) that is your problem ...

...parts from different sources and pay multiple shipping fees! The kit comes with original Sanyo STK IC?S , not those cheap aftermarket or china made IC?S full pictorial directions, the thermal ...

...properly. This is a convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually charge between ...

...dificult to see images the color on my tv is destorted what is causing this Replace Both of your STK ICs ,they will have part number on them and they are big black ICs example# ...

Ive replaced the stk chips & im still gettting a converge proble??? Did you replace the 3.9 ohm fusible resistors? Often several of those will blow with the old ICs.

just purchased this tv used and it wont turn on. what can this be Bad STK ICs can cause this Mats has them 1-800-628-1118 They are Big Black ICs will have part number on them.

...the TV is 3D and a smell of burning when it is on. It happened all of a sudden no warning. Replace STK ICs,big black ICs will have PN# on them. also CK low ohm resistors Mats has ICs ...

...made by Samsung---hope you have the original remote----if you tried to adjust and it will not the 2 stk chips will need to be replaced (USUALLY STK-392-020 OR 040).What kind of help or questions do ...