Questions & Answers for: Pontiac steering shaft

steering shaft on 2000 sunfire Hi remove the LEFT front wheel you will see the steering rack lift the rubber boot on the rack there will be a 11mm /7/16 pinch bolt you may have to turn the steering to

Ad

...steering shaft ( probably a 19mm-21mm or 3/4"-7/8" ) After you have this off, you set the pin of the puller in the dent of the steering shaft. Screw two bolts through the slots on the sides of the ...

Ad

...shaft If the steering is working ok it will be a new seal required in pump If steering feels funny or stiff there is a valve problem in steering unit Remove return line and make sure there is flow ...

...steering shaft to the rack and make sure its connected to the shaft if so then your rack is faulty You have a serious steering component failure that can not be diagnosed on this post. Have a tech ...

Question about 2000 Grand Am GT

1 Answer

...steering pump run off a shaft driven and not belt driven. This means that when the steering system is stressed instead of the belt slipping it puts a lot of stress on that shaft and could cause that ...

...steering shaft,Healp!! The front wheels of the vehicle must be maintained in the straight ahead position and the steering column must be in the LOCK position before disconnecting the steering column ...

steering shaft has broke or the rack and pinion is broke have someone turn the wheel and look under hood near where the steering shaft meets the rack and pinion. do you see it spinning? if so the rack

Question about 2004 Grand Am

2 Answers

...steering wheel off the shaft.above the nut on the end of the shaft there should be a snap ring that is to be removed so the nut can be removed from the shaft.then the puller can be installed to pull ...

...steering shaft so I change it. Both ends of the shaft have flat sides with a notch for the tightening bolt. Now my steering wheel is off. About the 11 o-clock position. Since there is no adjustment I ...

...should just pop towards you and hit the loose nut on the steering shaft.Remove nut and remove wheel.Always mark wheel location on the steering shaft for easy reinstall alignment of wheel to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...