Questions & Answers for: InFocus sound dim led

InFocus Proxima UltraLight LS1 LCD Projector The output to the screen is dim, so dim the only way to view the screen is to blacken the room completely. There could be several reasons for this problem.

...sound comes from the small speaker. 2) From the power light indicator comes an dim amber color light. As far as I know, after I disasembled the projector, the power supply is in good condition ( I ...

dim light output hi bought 4805 on ebay and works fine but it was very dim. i took it apart to clean the light path and now 1/3 of the screen is wonderfull and the rest is dim. so in cleaning i ...

...projector on. you should hear the fans and a high-pitched whir. if you don't hear that whir or it sounds like a noisy motor, the colorwheel needs replacing. if it sounds good but no light, make

InFocus 4805 - right 1/3 is fine, middle 1/3 dim, left very dim. InFocus 4805 - the right 1/3 is fine, middle 1/3 a little dim, left 1/3 real dim. Very sharp zones. 2.5 years old with 500 hours ...

When the unit projects (InFocus 4805), there is a dark vertical band at the left edge of the screen that is dimmed. It's about 5-10 percent of the width of the screen. It is projecting into this area,

dim, dark, fuzzy the lamp has less than 200 hours on it but the image is very dim and fuzzy and dark. why could this be there should be 700 hours left on the lamp!? your light tunnel is out of ...

When we power on the projector, the orange led is very dim, no fans no lights ,I have replaced the bulb. any thoughts? the power supply needs to be replaced

InFocus LP 540 is extremely dim Dim image is normally due to a defective lamp assembly. I'd recommend removing the lamp and inspect its condition. You'll notice a black corrosion build up ...

dim. The projector made a faint sound like it was going to turn off and the. It would power down. Now there is no power getting to it at all because the LED light goes from dim to off. Any suggestions