Questions & Answers for: Chevrolet TrailBlazer socket for lamp

...retaining stem into the slot in the fascia. Engage the cornering lamp forward retaining tab into the fascia by pushing in on the front of the lamp. Install the bulb socket into the cornering

...lamp switch OFF until the bulb change is complete. Always wear eye protection when changing a halogen bulb. Handle the bulb only by its base. Avoid touching the glass. Keep dirt and moisture off the ...

Left headlights do not turn only the right ones do. common problem is melted lamp sockets or headlamp relay also check fuses in underhood electrical center

I keep blowing Headlamps on my 2004 Trailblazer? It looks like the connectors are getting burnt also. Any ideas? If none standard lamps are being used, ones that draw more power than standard lamps, ...

...on how to replace license plate bulbs. Remove the 2 screws that retain the license lamp lens to the liftgate. Remove the license lamp lens from the liftgate. Remove the bulb (1) from the

...fit either the left or right side of your Trailblazer. replace both front and rear bulbs Are you using the correct lamp/bulb # ? Do you have a proper ground on the right rear socket,that won't

...lamp. This gives you access to the headlamp. Now when you get to the light buld and socket turn counterclockwise.Then the light bulb wil come out of its socket.From here disconnect the electrical ...

...pasenger side stop to light,I put new light bulbs,still no lighting Remove the bulb & check the socket to be sure is is not corroded. Check for a good ground level on the ground wire of the ...

...socket) either from another working ground wire or from another grounded part of the car (frame, chassis, etc.), to the ground wire common to the sockets. Once you have a working ground in the tail ...

...Lamp Outage 2 or 3 times faster than normal flash rate 35% to 55% Have you check the front and rear left side bulbs? One could be loose, faulty or have socket plug corrosion causing intermittent and ...