shredder is on, all lights are on but its not taking any paper or making any noise when the paper is put in to shred, its just not working. you need to make sure that the paper detection sensor is not
...noise. It almost sounds like a tooth is out of line. This is a very common problem. Go out to the hardware store and buy some silicone spray. With the shredder unplugged, spray a good amount of the ...
... make sure the circuit breaker for the shredder outlet is on. tell me is there any humming noise? or any sign of power getting in to it? Please post back further comments for more information... ...
noise is heard before the red light comes on. The problem was solved by putting some oil on the top of the shredder and running the motor forward and in reverse to coat the teeth. Thank you. There are
Shredder starts to shred, then makes a loud noise, and blades don't turn sounds like a couple of teeth on a drive gear may be broken. call Fellows at1-800-955-0959.
shredder makes noise, sounds jammed If it has a reverse function, you should try that to un-jam it.
shredder. It turns on and makes a "shredding noise" but the blades don't move. Can you help me troubleshoot? you have some teeth missing off of one of the gears, most likely the dual gear thats driven
...noise, does not shred Add some paper shredder oil. A shredder needs oil to function properly, oil should be applied every month or more depending on how often you shred. Learn more here: ...
...shredder motor seems to be working fine (same noise as usual) in both forward and reverse, however it wont accept paperfor shredding .I have removed as much cut paper between the shredding blades as ...
Question about 220 Powershred Strip-Cut Shredder
shredder making noise like it needs oiled, where do you oil it and what type of oil do you use? yo do not oil strip cut shredders
Usually answered in minutes!
61 Questions
64 Questions
52 Questions
31 Questions
23 Questions