Questions & Answers for: Ford shear

my distributor wont turn!!! I have a 1987 ford ranger with a 1983 model 2.0L in it with a 1 barrel. One day i was on my way to work and it just died on me. I replaced the plugs, wires, ignition ...

my 1995 ford explorer started clunking when put into reverse and then it just quit moving after that. Any idea? The fluid seems fine? possibly something sheared in the rearend

distributor camshaft gear keeps shearing i have replaced several pins,which seems to shear when the motor is at high rpm's. Whats causing this?. It happened again yesterday and i thought it was the ...

bolts have sheared off on the steering box. How to It appears that the bolts that affix the steering box to the frame have sheared off. Broken off inside the thread. I will have to drill out and ...

i have the bracket and the other half of the bolt with the bolt head on it, but the part with the threads is stuck where its connected to the engine. do you mean you have a sheared bolt stuck in the ...

third row seat won't move.motor can be heard but no movement bad gear,,,either gear pinned or key'd to motor shaft has sheared-off,,or gear missing teeth,,check both and replace gear on attachment to ...

timing belt will not rotate no spark engine rotates cams will not turn and have no spark timing belt is tight The timing belt teeth are sheared off and you must replace it.

the bolt in the cat converter sheared off, how to remove without further damage I recently replaced the cat converter and both o2 sensors buy a reverse drill bolt remover

...slight slip when taking off in water but sometimes it doesn't, any ideas check for a failing rubber shear bush in the propellor take i the prop in to a service shop for a mechanical test of the bush ...

...poor, sort of like it jumped time. I'll skip everything I tried to fix it.... turned out to be the shear pin in the oil pump drive/ gear shaft had begun to shear. It moved the timing just slightly. ...