Questions & Answers for: Toshiba setup controller encountered during installation

...encountered a problem installing the driver software for your device? appears, click Close. 8. Restart Windows. this bug is tricky good luck Little more info for novices. Double click zipped driver ...

...DURING EARLY STAGES OF WINDOWS OS SETUP-IMMEDIATELY AFTER THE STARTING WINDOWS STAGE oh no!! there's a possibility that it has a virus contiained on your hard drive. If you have rescue disk( comes ...

during text mode setup hai, my laptop is quite old and the OS clashed. am trying to load windows but it cannot load some Xp files during text mode setup so it terminates installation. when another RAM

...setup disk. That happens because the BIOS uses a SATA controller that is not included in Windows XP install disk. Usually you can solve the problem going to BIOS settings and changing SATA/RAID ...

...Setup Did not finde any hard disk drives installed in your computer Pl Help me outfrom this problems Depending on the model of your Toshiba, it may have an unsupported hard disk controller which ...

...controller that is not included in Windows XP install disk. Usually you can solve the problem going to BIOS settings and changing SATA/RAID settings.Check your BIOS settings, and disable SATA RAID ...

...controller, which will be loaded during the windows setup. to do this, you need to retrieve the S-ATA driver from the toshiba website and copy it to a floppy disk. it HAS to be a floppy disk, because ...

...setup or possibly the hard disk. Dell actually has some good information on this.Don't worry that the information comes from Dell, because the problem is a Windows issue, it's not a Toshiba issue, ...

...controller to an AHCI. You must set to native IDE or anything else like that. If you wish set an AHCI driver you must press F6 during starting windows XP setup. And put the drivers (get it here) to ...

...the subtitles I think you really want to turn off closed captions; subtitles cannot be removed. CC selection is made during initial setup. You will have to return to the setup procedure and deselect ...