Questions & Answers for: samsung tv screen parts upper

...samsung 50 inch plasma tv, we have only half a screen Samsung 50 inch plasma tv, we need help. I have a Phillips 50 inch Plasma. About two months out of warranty the top half of the screen would go ...

Samsung BN96-02216A BOARD, Y LOWER BUFFER ASSY Try to replace the Logic board or X main board. Hey the probelm i think is the buffers low or upper left side on back when cover is taken off cost about

...samsung plasma tv only 2 years old ...the screen died yesterday. I get voice but black screen. Even when I push the menu button on the remote I get nothing black screen. Hi, welcome to fixya! without ...

...samsung HP-R4252 that has sound but no picture (screen does not display anything). I turned the unit on, and something on the top part of the upper Y buffer board blew (with pink smoke and all). I ...

...Samsung PDP model # HP-R4252? I beleive mine seems to be the problem concerning my tv not to have a picture. Also I smelled something burning. My nose led me to this part. I could also see burn ...

...samsung plasma tv that i think i have a 50 inch samsung plasma tv that i think needs regassing. the bottom 3rd of the screen keeps going black and the picture quality is very grainy!how much would i ...

samsung hp-s5033 we change three pannels set still wont power on. WHEN YOU SAY SUSTAIN BOARD YOU MEAN Y BORD AND WHEN YOU SAY BALLAST BOARD YOU MEAN UPPER Y BUFFER BOARD ONE RULE WHEN THE Y BOARD OR Y

tv have problem with the Y buffer board. Normally Y buffer board is placed in the top or bottom of the sreen (Lower Y buffer or Higher Y buffer). The Y buffer board will look like in the picture. Also

pink smudge in upper quarter if the plasma tv screen check for any burnt or defective component parts at buffer board.

...TV will operate normally for a short time and then start all over again http://www.shopjimmy.com/samsung-bn96-03365a-g-buffer-board.htm Watch the video. Also be advised that plasma sets are getting ...