Questions & Answers for: samsung tv horizontal picture adjustment

...Samsung PCL545R its having an issue with black lines that flash horizontally when the picture is suppossed to be white or bright. I can adjust the contrast or brightness to eliminate them but then I ...

OSD SETTING! TV shows 9/10 of the full picture horizontally. I am missing the bottom 1/10 of picture. How to adjust OSD setting? Please advise May be light tunnel repair. Is the bottom just darker?

...tv to the default mode.or visit the www.samsung .com or try toadjust it yourself using the adjustment settings hello, Most of the cases, this kind of problem fault in the horizontal and vertical ...

samsung dlp replaced color wheel some tv repair person replaced the color wheel on my samsung and when he brought it back there was a no picture area in the bottom of the tv. its about 3 inches at the

TV off. Press "Mute" 1 - 8 - 2 "Power". This will open the service menu. You can adjust the vertical and horizontal position from the first or second menu item. Just be careful not to change any other

Samsung HLN4365W picture not centered I've tested all the inputs and the screen is shifted horizontally left about 1 to 1.5 inches, the vertical position is fine. I checked all the settings and have ...

...TV suffers from horizontal phase shift. It may be due to the Ic fault or horizontal output sync: signal from the LOT not reaches to the respective pin of that Ic. Check first whether the horizontal ...

Change value data by pressing + (or right cursor) and - (or left cursor) to shift or increasse amp. If it work, your tv will normal. But its nor working, you should call samsung technician. Good luck

...Samsung LCD TV mod. LN46B650T1FXZA that was not turing on I asked you before. The TV was not turning on,the power light kept blinking, with a beep, so i check the power board and change 3 caps. that ...

Samsung 32 LCD TV; Image horiz size is too large overruns screen L-R; See Details for more info What is the root cause & how can it be corrected? Thanks, Steve input=cable; via onscreen settings; ...