Question about ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)
...setup problem Hi, Can you please advice me what's the problem with my d-link 2640 as after i configured the status LED still blink? Is it the reason why I cannot connect to network? Thanks. Regards, ...
Question about RangeBooster G WBR-2310 Wireless Router (WBR2310)
...Safari. When you are prompted for a username and password just type Admin for the username and leave the password blank. Now you will see the setup page of the router, select if you want to run the ...
Safari to access the printserver's web-based setup page. Step 2: Go to the address bar and enter the IP address you've assigned to the PrintServer. NOTE: To assign the PrintServer a static IP address,
Question about DIR-625 (790069292637) Wireless Router
...setup Bridge Mode You Need a Computer Or Smartphone with Full Browser (Chrome, Safari, Internet Explorer etc) Firefox to Login to Dlink Router Console. if you may have an extra Ethernet Cable That is ...
Question about AirPlus Xtreme G DWL-2000AP 802.11g/b Wireless Access Point
...safari) where you would normally type a web address. You will be prompted with a password, enter the password. Now go through the setup and change the SSID when prompted to. Now enter that SSID which ...
Question about RangeBooster G WBR-2310 Wireless Router (WBR2310)
safari), and type in 192.168.0.1 into your address bar 4.Into the log-in page username:admin password: (none) 5.click on "SETUP" 6. Click on "MANUAL CONFIGURE" 7..in the Internet connection type, make
Safari, and type http://192.168.1.1 and the router should come up. The manual will tell you the default password and username if there is one. Once into the router, you have do some setup depending on
Usually answered in minutes!
1,082 Questions
984 Questions
709 Questions
641 Questions
532 Questions