...reset my brake pad service light 2006 mini cooper If I was working on it I would disconnect battery to "try" to reset the computer usually i have managed to succeed doing so wait a couple of means ...
...reset the pad sensor light? I thought it may go off by replacing the warn sensor. One method describes just turning the key to position 2 and giving it about 30 seconds and that it will reset on its ...
...pad wear sensor? If so, try leaving the key in the on postion for 30-45 seconds (dont start the car) This is how we reset the lights on BMW's and the Mini's use a similar system for service lights I ...
...rear brake pads and sensor the warning light is still on mini one convertible 54 reg you need to reset CBS DISPLAY IN ACCORDANCE WITH FACTORY SPECIFICATION.LOOK IN GLOVE COMPARTMENT FOR FACTORY ...
...pads check your auto book that comes with the vechicle and it should explain to you on how to reset the warning light and if that does not work then you go to the car lot and they will tell you ...
...is the brake pad warning light. When is goes off the brakes, front or rear, need to be replaced. The brake pads and the sensor have to be replaced, as once the sensor is tripped, it can't be
...on my 2004 mini coopers s and now the sensor light stays on, how can I reset it did you replace the sensors when the pad wears it cuts a wire on the sensor if you look at the sensor you will see ...
...reset the printer to default setting??? Ok my what you need to do is first go into service mode by pressing asterisk key(*) on control panel and then press2& 8 simultaneously on numeric key pad ...
...reset the brake pad warning light to off but I'm not sure where the BS or reset buttons are to try this procedure. if you didn't replace the brake pad wear sensor, you wont be able to reset ...
Usually answered in minutes!
384 Questions
294 Questions
275 Questions
253 Questions
183 Questions
