2004 Mini Cooper Logo
Posted on Mar 12, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2004 Mini CooperS- brake service light stays on

Light stays on after new brake pads/ rotors installed

  • phisig74 Mar 12, 2009

    Thanks, Wiz. I'll relay the msg. It's on my daughter's car; I don't know if they replaced the sensor or not.

×

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

  • Contributor 1 Answer
  • Posted on Mar 29, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Joined: Mar 29, 2009
Answers
1
Questions
0
Helped
1466
Points
1

I had same light staying on after brake pads/ dics were replaced. You need the brake sensor replacing. I think it cost me around £125 from a bmw/ mini garage!

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotĀ 5 achievements.

Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

Governor:

An expert whose answer gotĀ voted for 20 times.

  • Expert 55 Answers
  • Posted on Mar 12, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that gotĀ 5 achievements.

Sniper:

An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

Governor:

An expert whose answer gotĀ voted for 20 times.

Joined: Mar 04, 2009
Answers
55
Questions
2
Helped
46057
Points
224

Did they replace the brake pad wear sensor? If so, try leaving the key in the on postion for 30-45 seconds (dont start the car) This is how we reset the lights on BMW's and the Mini's use a similar system for service lights

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Our ABS light stays on constantly .Lose brake pedal occasionly. Replaced brake pads, caliphers, rotors. Still have ABS light on and lose brake partically.

If you have brake fade that is if you hold the brake pedal down and it slowly goes down to the floor you probably need a master cylinder
0helpful
2answers

Light on dash for brakes and w/o, what does that mean

heck thebrake fluid level before you go any further ,
1helpful
1answer

Reseting the brake sensor in a 2004 s mini cooper

did you replace the sensors when the pad wears it cuts a wire on the sensor if you look at the sensor you will see it
1helpful
1answer

A warning light in my 2004 mini - light on top next to seat belt light on left - looks like a steering wheel - what does that mean

That is the brake pad warning light. When is goes off the brakes, front or rear, need to be replaced. The brake pads and the sensor have to be replaced, as once the sensor is tripped, it can't be reset.
0helpful
1answer

I replaced my brake rotors on a 2004 gmc canyon and installed new brakes. everything works great, however my abs light stays on now.

IF you installed the wrong brake rotors,without the ABS reluctor ring[if equipped],the light will come on.Second possibility is you damaged the ABS wiring to the wheel speed sensor.There is a harness to each wheel.
0helpful
1answer

I have "Check your brake pads" light on. I've called the dealer a they said that a standard brake service includes replacing pads AND the rotors. Is this normal?I've never changed the rotors (disks)...

It always makes a better job to replace both, as you can imagine. Whether they stay or not is based on Minimum thickness, and is there enough material left to meet thickness spec, after truning.

Another thing that is different, from time to time is the disks can often be replaced with new, for less than / or close to the truning charge...in this case, no brainer, new disks...
2helpful
2answers

Just had new pads and rotors put on my 2002 BMW 330i by a mom and pop shop but the brake light is still on. Were they installed correctly.

the service light needs to be re-set using a european scan tool,capable of communicating with the on-board computer. the scan tool at the parts places will NOT work
3helpful
2answers

2004 Mini Cooper Indicator light problem

BRAKES! Replace your brakes NOW. You have less than 2MM of pad lining on (most likely) your front brake pads. No brakes, no stop. No stop, no MINI.
1helpful
1answer

Mini Cooper 2004 Brake Pad Warning Light Reset

One method describes just turning the key to position 2 and giving it about 30 seconds and that it will reset on its own. A manual method is described here:

Mini Cooper Reset Service Indicators
4helpful
2answers

What does this warning light mean?

you're do for brake service. either the front or rear brake pads have worn down to
minimum. if when you apply the brakes you don't feel pulsation, just replace the brake pads and sensors and that will take care of the light.
Not finding what you are looking for?

1,476 views

Ask a Question

Usually answered in minutes!

Top Mini Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sam Akber
Sam Akber

Level 3 Expert

1149 Answers

Are you a Mini Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...