Questions & Answers for: Iomega replace hard drive

...hard drive stopped working. it makes a ticking sound and turns off on it's own. This means that your hard drive has died so will need to be replaced. This is what you need to do: 1. Buy a new hard ...

...leads that attach to your hard drive including electrical extensions + IDE,SATA and the ones that attach from your motherboard to hard drive replace them they are probably old and faulty ? good ...

...hard drive? First test your CPU then tast all leads that are attached to your hard drive sounds like a faulty lead of some sorts then try replacing all the leads that attach to your hard drive ...

...to hard drive make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ? good ...

...to hard drive make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty or just replace them they are probably old and faulty ? good ...

...replace this port? Yes you can replace the port, of you can see what hard drive is in the drive and get a new external holder/card for it and use it that way. either 2.5 inch sata or 3.5 inch

hard drive)) make sure they have a secure connection and are not faulty or just replace them there probably old and faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy

replace the hard drive controller board that is inside the case due to damage caused when the USB cable was impacted, shearing off a component on the board. Where can I buy replacement part. This is a

...iomega ultramax. Iomega did replace the power supply but only after many weeks of dealing with hard drive problems and nearly replacing 2 500GB hard drives before discovering it was the power

...Hard drive had accidentally got mixed up with that of an identical cable for my electric razor. When I went to power it up I fried the controller board. Is it possible to get a replacement board? I ...