Questions & Answers for: Lasko removing fan

how to open the casing How do you open the shell of a Lasko Fan 2115? I'd like to clear the blade inside and perhaps, I might also see why it's a bit wobbly towards the base. Question does the base ...

Removing fan blades I need to know how to remove the blades from the motor assembly so I can replace them. Joey Temal is right. After removing any small metal retaining clips (which are obvious and ...

...fan clean with compressed air or a compressor. It does not require removing the cover. The cover comes off with a twist and a pull, but does not stay on well afterwards, so I don't recommend ...

The inside of my fan looks very dirty and I would like to take it apart to clean. Do you have any instructions on how to do that? #1 CLEAN WORK SPACE #2 PLACE FAN ON ITS CONTROL SIDE DOWN #3 REMOVE ...

how do i open the fan it doesnt have any screws n it stop occulate remove the screw on the sides, then CAREFULLY remove the top of the grill, remove the screw of the speed control, then you finally ...

is there a way to open fan to clean blades? ty yes, there are screws on the side that you have to remove first. you have to remove the screws for the handle on the outside of the fan case, but the ...

Need to remove cover on LASKO tower fan Type TF3 to clean out dust accumulation. 2 of the retaining screw heads have no screw driver slot. How are these removed? DO NOT REMOVE SCREWS OR TAKE APART.!! ...

need to clean and don't know how to take apart The fan uses security fasteners to prevent dis-assembly. To clean the fan, disconnect power from fan and use compressed air to remove dust.

...fan blade. The nut holding the blade on is reverse thread, so "lefty loosy, righty tighty" will not apply--turn the nut clockwise to loosen. Remove the nut and lock washer, then pull the blade from ...

How do you remove front grill of Lasko NSC-243 to enable cleaning? Thanks. A tower fan should not be opened at all. (It’s unsafe to do so, and may damage your fan.) Every two to three weeks, simply ...