Questions & Answers for: ACE remove tape

Replace Bulbs in Dimplex HUR20 (HURSEY) OPTIFLAME FIRE Volts: 240/50Hz - Watts: 2180 - Elements: 2000w When the heater is switched on, it normally has a coal effect display, except all the bulbs are ...

...tape, in the spring. Remove the tape. Install the new one (insert the tang into the hole and twist). Remove the nail and carefully allow the spring to pull the new tape in. I hope this works for ...

does dimplex model 6902340100 have a fuse, stopped working no fan, no light took back panel off could not find a visable fuse. My friend just had the same problem. It turned out to be the Remote ...

...bulbs on Dimplex HTN 20 If you have a compact fireplace in a cabinet mantle, you will need to remove the front Plexiglas and frame from the front of the firebox. Remove the logs, then the 1- ...

...USA, Technical Service at 888-346-7539 If you want to Troubleshoot and access the bulbs yourself: Remove the Plexiglas from the front of the fireplace and carefully remove the logs. The ember bed ...

don't know how to access lamps Remove the front Plexiglas, by removing the screw on the top left and right corners of the glass's frame. Then remove the logs and below them, the formed plastic ...

my dimplex electric fireplace model HEF22 wouldn't turn on take out fireplace flame, 4 screws, in the middle is a thin sq. black box 1.5 inchs sq. with an insulated screw driver pull it forward. ...

How do I remove and clean filter Here is a similar one and the manual has a section on cleaning. http://www.appliancefactoryparts.com/content/pdfs/146098-1.pdf ...