Question about 2004 FXDX - FXDXI Dyna Super Glide Sport
...oil cooler install My question is about oil filter removal and what do you do? Especially with regarding the crankshaft position sensor being in the way. I have just fitted a Dyna oil cooler kit p/n: ...
...oil cooler install My question is about oil filter removal and what do you do? Especially with regarding the crankshaft position sensor being in the way. I have just fitted a Dyna oil cooler kit p/n: ...
Question about 1993 XLH Sportster 883 Hugger
...oil cooler. how to install oil cooler? Little tip -The only time the oil cooler will cool is when the bike is moving and when the bike is moving you don't need the oil cooler. This is from a factory ...
...oil cooler? If it's running way too hot, there is something wrong. Usually timing or air/fuel ratio. Adding an oil cooler will only mask the problem. If it's within normal operating temperature, an ...
...oil cooler on HD's, but I, personally, have never seen it done on 2002 sportsters. Hope this helps. If you find this information useful, please vote on this post. Thank you. Regards, Oz Most have oil ...
...oil cooler? You '70 model has the "long" style oil pump on it. It has a inlet and an outlet. Of course, the hose from the bottom of the oil tank goes to the inlet. From the outlet of the pump, route ...
Where can I find the hoses for an oil cooler harley part #62985-04 for a 2004 FXDWG? An Auto Shop can provide the hoses you need for your oil cooler...
...oil cooler. We ssem to be getting air in the line w/ the cooler hooked up but when when we bypass it everything is fine Since the oil cooler on your Fatboy is an "add-on", there is not a diagram for ...
Question about 2009 XL 1200L Sportster 1200 Low
...try running SYN 3 Harley oil it runs cooler than non-syn also run an oil cooler. Engine oil temp should be around 180 to 220. The cooler the engine the quieter the moving parts to a point. Good ...
Question about 2006 XL 1200 C Sportster Custom
...oil cooler, the feed line IS NOT the one you want to install this on!!! Why? The feed line is gravity fed to the oil pump, and there is no pressurization in this line, and the line could cavitate ...
Usually answered in minutes!
681 Questions
595 Questions
586 Questions
644 Questions
456 Questions
