how do you take apart a 12" mofo how do you take apart a 12" power acoustik mofo i took out the three bolts holding the magnet to the cage but cant remove anything its glued on
How do i wire two 15 inch subs to 2 ohms how do i wire two fifteen inch Power Acoustik Mofo-X subwoofers down to 2 ohms to a monoblock amplifier Hello familia_gome, Those MOFO-15's have dual 1ω ...
i need an enclosure for a power acoustik mofo 12''. I need a recommend enclosure for a power acoustik mofo 12'' sub. Hello miles_jamike, Power Acoustik recommends a 1.25 CuFt sealed and 2.0 CuFt ...
i have a 12 in mofo, and its the basket is coming apart from the voice coil, i cant figure out how to take it apart to fix it??? IF U CAN LOOK EVERWHERE FOR A RECONE KIT, IF U CANT FIND ONE THEN IT ...
when i turn my power acoustik mofo 12 up its starts to make a really back like clicking noise. wats wong with it?? the voice coil is over extending. it is either almost blown or is not getting enough ...
i have 2 15 inch mofos do i need two poweracoustik 4000D AMPS? You want an amplifier that is rated for the subwoofers. In your case your subwoofers are rated at 1500 watts rms each, so you will need ...
i need another power acoustik mofo 12 and i cant find any where do i find them NEW POWER ACOUSTIK MOFO-122X 12" 2700W SUBWOOFER SUB
speaker not working well, i had my 15" power acoustik mofo hooked up correctly, and it just stopped working. the voice coil is not blown, but when i hook up my volt-meter up to the positive and ...
are the new mofos better or worse then the older modles? the older ones look massive but ive read on other reviews that the new ones are better? i dont get how? the older ones weigh like 70lbs and the
how do u wire a mofo 15 down to 1 ohm see this link put in your info i dont think you can run it at 1 ohm you would need two subs at 4 ohms. Rockford Fosgate Woofer WiringWizard
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions