Question about BALBOA 30kW HEATER ASSY L SENS PRES SW VAL LE SYS TUV ()
My balboa spa just keeps running constantly and never shuts off. It may be in sleep mode or Eco mode. If you hit jets then lights it toggles through. You need to be on st mode. Which is standard
...lights as well as the regular spa light. I press the light button on the top controller and the indicator light turns on, but the lights don't turn on. Any ideas? Understand that this information ...
instruction manual for balboa vs5000 spa I have a Clearwater Spa with a LM8000 spa pack that the control module does not work. Can I purchase just the control module or do I have to replace the ...
...spa keeps flashing and key pad not respond well Sounds like control panel failure or the keypad is locked/stuck.Try hold temperature UP & DOWN together for 6 seconds. or if you have a Balboa 7 ...
Question about Master Spas Copper Heater Jumper Straps X300390
...master spa. i checked the pumps and they worked good. but the control panel wont turn them on. what can i do? Is there a message code on the spaside control panel? That would be important to know. If ...
How to test Balboa heater We moved the spa, rewired and started,pump ran, heat light on, in the morning nothing, sounds like GFI breaker is tripping and K3 clicks, removed left hand heater copper ...
Question about Duplex Digital Panel 2 Pump
The instrumentation panel says "SL" and the spa isn't heating.How do I get it to heat again? You have it in "Sleep" mode. Spa will not heat normally in this mode... If the SL Message is Alternating ...
My Balboa topside control panel lights doesn't work is there a way to fix it? No the topside need to be replaced check voltage to it and check fuses inside power box if ok bad display if no voltage ...
Question about Duplex Digital Panel 2 Pump
I have a marquis spa with a balboa board the heater light come on but it wont heat up check fuses if blown probably need new heat element
Question about Duplex Digital Panel 2 Pump
Master Spas LSX 1050 (built in 2004) to work properly My spa had some mouse damage, and I tried rewiring the wiring harness from the topside control, but I ended up ruining the connector. I have since
Usually answered in minutes!