Questions & Answers for: master spa lights working

Ad

Question about Dream Series Dream Master Hot Tub with Flex Cover

2 Answers

...Master spa. Worked fine when drained last fall. Winterized with RV antifreeze. Just filled it and nothing happens. Heater light on solid for 30 seconds then starts flashing. Any ideas? You probally ...

Ad

Question about Dream Series Dream Master Hot Tub with Flex Cover

1 Answer

...master 110 volt spa ok when winterized with 3 gal RV antifreeze. After filling and plugging in heater light comes on for 30 seconds then starts flashing. No heater, no pump, nothing runs. Thank you ...

Ad

Question about MASTER TEMP HEATER 400 000 BTU NG LOW NOX HD EXCHANGER

1 Answer

...Master Temp 400 heater is 2 years old and has been working perfectly until recently. After a recent thunder storm, my fan has come on and will not shut off. There are no readings on the temperature ...

Question about Dream Series Dream Master Hot Tub with Flex Cover

0 Answer

...spa light blinking off and on and nothing is working. I have shut it down but that did not help. When I turned it back on the light started blinking again and nothing works. Thanks, Brian ...

Question about Aquaflo Flo Master Xp2 Spa Pump 1.5 Hp Two Speed

1 Answer

...spa hums for a few seconds then kicks off. No flow. lights and control display are working. Is the shut off occuring @ the GFI? & is there an error code displayed on your topside? If the breaker ...

Question about Dream Series Dream Master Hot Tub with Flex Cover

0 Answer

I have a great lakes hot tub. The control panel has the following buttons. jets.temp.light. The motor is pulsating. if I hold down the light switch the motor runs normal. I release it pulsates. Jet ...

Question about Aquaflo Flo Master Xp2 Spa Pump 1.5 Hp Two Speed

1 Answer

lights up, the light works but when I press the JETS button, all I hear is a click, the pump does not run See if you can verify that the hi speed post in the motor has been hooked up electrically. (It

...lights are working but jets are not. What wires could be wrong - I don't have clear red, black, white and green wires. The spa is a freeflow passport spa. there should be a wiring diagram on the side ...

how can I manually light a master temp pool heater? the ignition control module is not working the light the ignitor. you can not do that danger will robinson!!!

Master Spas LSX 1050 (built in 2004) to work properly My spa had some mouse damage, and I tried rewiring the wiring harness from the topside control, but I ended up ruining the connector. I have since

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

john h

Level 3 Expert

23515 Answers

David Spradling
David Spradling

Level 3 Expert

11776 Answers

rogerpaul3

Level 1 Expert

62 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...