...few times and then goes to floor, then it comes back up pushing my foot up with it? You have a bad master cylinder my friend, all the braking force is going to the rear hence the lockup, the front ...
Changing a master cylinder How do re get the resevoir off the master cylinder on a '93 chevy corsica? t just pulls off, it sets in rubber seals.
...in a glass jar with some brake fluid in it...keep the hose end submerged in fluid. Begin with the master cylinder. with hose connected and jar lower than the cylinder, open the bleeder, lightly ...
have to pump on the breaks to get the break lights to come on. master cyclinder
abs pedal goes to floor,when you pump a few times it comes up but right front grabs hard pulls car to right what could it be Master cylinder, and brake caliper not releasing
Some car years have drum brakes in the rear & some have disk, some have a single line from the master the goes to the front & rear & each "T"'s off in the middle letting equal pressure to
need location on where & how to add refrigent or freon to 1995 chevy corsica Look for the Air conditioning compressor. Find the two aluminum hoses coming out of it. Trace it backwards and you ...
The brake peddle goes to the floor and has no pressue to the peddle? the brakes will still stop the car? you lost 1/2 master cylinder only front or rears are working or you have air in master cylinder
master cylinder what brake lines go in what holes The lines are size keyes, so you can't connect the wrong line to the front and rear brakes are smaller lines.,
engine temp sensor/switch I cannot find the engine temp sensor/switch that feeds the ECM. I found the one right by the coolant outlet hose in the front right under the air filter duct, but need the ...
Usually answered in minutes!
204 Questions
184 Questions
199 Questions
173 Questions
159 Questions