Questions & Answers for: Jaguar X-Type manifold

...hose leaking brake booster vacuum hose leaking I want to know what IMT stands for Hi d inlet manifold tuneing The valve increases or decreases the manifold ...

...X-Type 2.5 Have you checked the large rubber pipe that goes from bank 2 cam cover to the intake manifold as they are prone to splitting. To check you will need to remove the 3 srews that hold the ...

...EGR VALVE FAULTY MASS AIR FLOW SENSOR OR BAD COOLANT SENSOR BAD O2 SENSORS.LEAKING INTAKE MANIFOLD LEAKING EXHAUST PIPE OR EXHAUST

...engine light and codes P0174 and P1111. I replaced both IMT o-rings, PCV hose, and brake booster to manifold hose. The dealership couldn't figure it out. Help??? My Jag had the same problem. It was ...

...the number 3 coil is on the right hand side of the motor so you will need to remove the intake manifold to gain access to it.Intake Manifold Removal Remove the engine cover (if equipped).Remove ...

...may be the problem? You will need to replace the Vaccum Booster Hose which runs from the intake manifold to the brake booster.  I just fixed mine with parts from Partsgeek.com for less ...

...FLASHING AT LOW REVS FELLS ITS GOING TO STALL. air leak in induction system check around inlet manifold also the oil seperator under the inlet manifold the rubber hose goes soggy and draws air ...

engine hunting if it is a petrol i think you have a air leak check vacuum pipes on inlet manifold there is one at the back which is prone to getting left off or dislodged when changing plugs or the ...

what does IMT stand for Refers to the Inlet Manifold Tuning Valves, two large black valves on the top or side of the inlet manifold. The O rings can fail on these and the inlet manifold can get ...

2004jaguar s-type 4.2 liter water leak in back of manifold there are 2 hoses that run under the inlet manifold that are prone to failing. also the plastic tower at the front of the inlet manifold on ...