...showing checked all speakers none are shorted what should i do now it says protect meaning one of the speakers is shorted troubleshoot my speakers all were good put my old radio in everything worked ...
...kenwood CD player and all of the suden it stoped playing and beging to show protect on the screen, so please if someone can help me to solve this problem, hope to here from you soon. PROTECT shows up ...
...kenwood kdc-w3041 keeps showing up "protect". Everytime i take out two fuses in the engine bay, one of them which is the Radio 7.5amp and the other is a AUG 7.5amp, and put the fuses back in, the ...
code for kenwood car stereo kdc- mp232 showing "PROTECT" ON DISPLAY WHEN POWERED ON http://www.radio-code.co.uk/
...radio say protect Protect indicates that there is a short or a grounding problem usually within the speakers or the speaker wiring. Locate and press the reset button (pinhole). If protect comes back ...
Kenwood car stereo model # KDC-MP342U. Protect mode has been activated on it. I found I had a frayed wire on a speaker from window movement and have replaced the wire. When I reset the radio and enter
...Kenwood head units will show "protect" when there's a problem with the speaker outputs so check to see if the impedance load meets your radio, 8ohms or 4 ohms?. having parallel two speakers on a ...
my kenwwod radio model dnx 5120 shows protect on the screen when it comes on. what does that mean it means you have either a bad speaker, shorted speaker wires or a bad output ic.
...protect, then radio is bad...If it doesnt, power off and hook up speakers one by one and power it back on till it shows protect again....When it does, the last speaker wire you hooked up has either a ...
...kenwood will work just fine. I had the same problem here with a brand new Clarion speaker . In my case I just hit the reset button. The reset button is on the front, just above the headphone jack. I ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions