Questions & Answers for: Oldsmobile how to install a intake manifold

...intake manifold. Your cylinders have flooded with coolant and your engine is bound up. Remove intake manifold, dry out cylinders, install new intake manifold. That's what happened to our 1997 Olds

...install the intake gasket.) When you re-install your lower manifold, coat your bolts with pipe thread sealant. when you install the lower manifold, tighten the vertical bolts first, then the angle ...

...Install a new design intake manifold gasket. The material used in the gasket has been changed in order to improve the sealing qualities of the gasket. When replacing the gasket, the intake manifold ...

...intake manifold. Install the mounting bolt and nut. Tighten to 18 ft. lbs. (25 Nm). Install the air cleaner assembly. Connect the surge tank line to thermostat housing. Refill the cooling system. ...

...install battery terminal.... Not sure if it's the same, but on my 2001 Aurora (NorthStar), the started is under the intake manifold. You need to remove the fuel rail and injectors (be careful). Then ...

...Install the intake gasket. Install the pushrods and rocker arms. Raise and support the vehicle. Install the catalytic converter and dipstick tube and indicator if removed. Lower the vehicle. Install ...

...Install the intake manifold bracket. Attach the following electrical connections: MAP sensor, IAT sensor, and the purge solenoid. Using a new gasket, install the throttle body to the intake manifold. ...

...intake manifold bolts. Remove the thermostat housing outlet and thermostat. To Install: Install the thermostat and housing outlet. Install the thermostat housing bolts. Tighten the thermostat housing ...

...intake plenum. Install the rocker arm (valve) covers. Install the oil level indicator tube. Insert the dipstick. Connect the spark plug wires to spark plugs and looms. Install the left side exhaust ...

...intake manifold. Install the mounting bolt and nut. Tighten to 18 ft. lbs. (25 Nm) for the 3.1L engine. For the 3.3L engine, tighten to 20 ft. lbs. (27 Nm). Install the air cleaner assembly. Connect ...