Questions & Answers for: Dodge hello bolt

1998 Dodge Dakota engine compartment/chassis assembly dwgs. Hello experts, I am working on a 1998 Dodge Dakota R/T that hit a pole on the right front corner, taking out the fender bumper, grill, hood,

Changing a 2002 Dodge Caravan headlight How do I change a headlight on my 2002 Dodge Caravan? Hello, You remove the headlamp assembly by removing the 3 bolts that hold it in place. The bolts are #1 in

...Brakes To take rotor off do the bolts that hold the assembly on the hub turn opposite than normal? Hello Welcome to FY. Your caliper bolts turn right to loosen left to tighten. ...

...bolt , Hello, The only thing you can do is weld the broken area and the drill and tap the hole. Go to http://www.durafix.com/ and they have a solution for you. Good luck and let me know how you make ...

...Hello. There should be some bolts that hold the pulley on to the motor. Check behind the bracket, I believe they are the bolt size of 9/16. If you are trying to get the serpentine belt off, you can ...

...Hello There is a speed seneor on the rearend located on the top of the center housing there is 1 wire end and a 10 mm bolt to remove. the sensor pulls out \install the new sensor and bolt ,,, install ...

oil pump ,,,where is the oil pump located on a 1997 dodge caravan Hello Welcome! Oil pump is located on the oil pan. Parts needed,,,oil,,,, oil filter,,,, oil pan gasket,,, oil pump,,,, oil pump ...

...Hello acadiamaine, If the shock absorber bolt to the axle is a 14mmX1.5 it should be torqued to 110 Nm if it is a 12mmX1.5 bolt torque it to 70 Nm. The bolt to the frame side should be torqued to 140 ...

What does a lighting bolt symbol on a 2008 dogde avenger means Hello Carmen, I can only guess on this one. I would say the lightning bolt indicates the charging system is no working.

Hello can someone pls tell me torque specs on transmission to block bolts on 2007 Dodge ram 1500 4 x 4 5.7 These Mopar bellhousing bolts have been a 3/8-16 bolt since the early sixties and the torque ...