Questions & Answers for: Ford F-150 heater

I AM TRYING TO REPLACE THE HEATER CORE IN A 1996 FORD F150 4WH DRIVE TRUCK CANT FIGURE OUT HOW TO GET IT OUT Drain the cooling system to a level below the heater core. Disconnect the coolant hoses at ...

blown heater core in a 1977 ford f-150 pick-up what is the easiest way to remove and re-install 1976-79 Without Air Conditioning Disconnect the temperature and function control Bowden cables from the ...

how do i take the heater core out of my 81 f150 i need the way to take it out . it doesnt have air cond Disconnect battery ground cable. Disconnect cable from temperature blend door and the mounting ...

Do I have to remove the dashboard to replace the heater core in a 1985 F 150, six cylinder with a/c, and if so, are illustrations, etc. available that are more complete than Haynes or Chilton's? yes F

no heat engine gets warm but heater wont switch from ac to heat Start searching for a vacuum leak. The dash switch operates a vacuum assembly - but if the line is cracked, it "door" will not change ...

4.6 liter has one heater hose warmer than the other. may be plugged core,or is ther a fuse to climate control switch? Look for a heater valve on one of the hoses if there is no valve i would say its a

replace heater core Disconnect heater core hoses. Remove glove box assembly. Remove the 8mm screws holding the cover on over the heater core. There may be a module in front of the cover. Move module ...

putting heater core in Inspect/Replace If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core. When a heater core leaks, a new heater core

i replaced heater core on 97 ford f150 need map on how everthing goes back together If it is necessary to remove the heater assembly, the cooling system must be drained before removing the heater core

very little heat from heater.. have replaced the thermostat, heater hoses are both hot, and the blender door is working fine ( drilled a hole in the heater box and stuck a camera in ) try running ...