Question about Swingline® 36115 Staple Guns Tools 1, 000 /box, Light-Duty, 5/16
...sure about disassembling the unit (my usual method-but I'd recommend having the parts diagram handy), try using a flashlight to look at the underside of the staple head, where the staples come ...
Question about ID Armor SH2836ID2836 Shredder
It doesn't even power up- could I have burned out the motor? The strip it's plugged into is working with other machines Did you remove the top to clean recently? You may not of installed it correctly.
spl-txc22a won't start, it is only a month old.The switch is on and have moved it to another plug in. Cleaned out the hopper and wiped off the sensor but nothing. No lights or power. I have unplugged ...
I can only get the right side of the peripheral switch to work. Only the right side light is on. Whatever I hook to the lit side works, but not the unlit side. The light will switch from side to side ...
light is on for "door light is on for "door open", cant get shredder to work.... The switch for the door is not working properly. Not sure exactly how this model is set up, but the switch ...
staples 2x1 usb peripheral switch model 18799 using a dell desktop and a dell laptop Only one light lights up Only one light will be lit at a time as it switches from side to side. Find the yellow ...
staples mailmate SPL 727MM will not power up Shredder refused to power on. No light... nothing. 1st step: (MAKE SURE THE THING IS UNPLUGGED FROM 120 V FOR FOLLOWING STEPS) So, i dismantled it ...
SHREDDER CONSTANTLY SAYS ERROR DOOR OPEN? the door switch could be bad or not working properly. try to locate the door switch. open the door and see what triggers the switch. sometimes there is ...
plastic instead of something durable? The plastic broke off so now the switch won't work. Common problem. I would complain loudly to Staples. If you are handy, you can fabricate a new piece. Good luck
no power will not turn on Some shredders have an overload protector that cuts off power to the motor if it gets too hot. It may have failed. The motor may have failed. One of the switches that senses ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions
