Questions & Answers for: gate motors Cars & Trucks

...I looked at it today and found that you need to take off the "bumper" from each side of the lift gate. It should need a 10mm socket. The remover the lift gate handle with a "star" driver. Similar ...

...FIRST TURN OFF RADIO THEN DISCONNECT NEGATIVE BATTERY. MARK POSITIONS OF WIPER ARM ON THE LIFT GATE GLASS,THEN REMOVE WIPER ARM COVER AND NUT AT THE PUTSIDE OF THE LIFT GATE, THEN THE BEZEL,

you can hear my gate motor working, but the gate does not open or close. you can open and close the gate by hand. it is as if the gear does not engage Your manual override is active. This disengages ...

my electric driveway gates open and close but not completely. The power switches off before they close or open fully When I click the remote to open the gates, the motors start working and gates open ...

gemini gate motor Gate motor was installed 09/2010 and weight +- 90Kg.Now gate opens +-2.5m but when closing it only moves .3m opens again and closes .7m. Keep doing this and after a few minutes gate ...

how do I replace lift gate motor on 2008 Nissan quest? nothing Check fuse and power to rear gate , motor is inside the tail gate.

why liftgate acuator clicking when lift gate is open only happens when lift gate is open I would bet on the liftgate module (LGM) It controls all that stuff back there,wiper,defrost,gate ajar ...

Lift gate will not power down to closed when button on gate or remote is pushed. Lights do flash though. Gate was opened and closed manually many times due to an accident repair being done. Possibly ...

how to adjust open close limits on a 4 meter gate for a Germin motor on the shaft that controls the arm or gear for the gate movement there will be 2 cams open the gate and then loosen of one cam and ...

Gate motor unit is charging and battery is ok but when pushing remote the gate only moves about 20mm and stops IR beams are operational dc voltage is 13v dc sliding wheels are loose all fuses test ok ...