Questions & Answers for: Dream Maker Spas fc mode

my tub trips out upon power up was working ok last nite 28/4/2010. I don't know how you have it wired, but it is possible that the heater is on at the same time the pump starts and trips. The starter ...

Tub is not heating to temperature and flashing a Ec message on the temperature screen. the Ec message is reffering to the mode the tub is set for. Ec stands for Economy mode. In Economy mode the ...

mode (Press up/down then jets on) and can see codes of F2, FC, F6, F8 (are these filter modes?) Never see the 00 /30/60 described in the manual that came with it. I have unplugged it again, and waited

Was sitting in the tub trying to make it hotter I was thinking ... Do you have to be out of the tub with the cover on to make it get hotter or Can you sit in it & enjoy while it is heating up And ...

SL display came on. Not heating. If the SLP or SL Message is Alternating with the Water Temperature on the Display, the Spa is Operating in the Sleep Heating Mode. If the SLP or SL Message is ON Solid

I can't change from economy mode to standard mode on my leisure bay spa Bad button on the topside panel.

What does Ec mean EC on a Hot tub shows that it is in "Economy mode" meaning the spa will only heat during a filter cycle. Not a setting to be in if you live in "cold country" (you risk having the ...

What does code ECO mean? economy hit mode button should go to standard

my spa is at 89 and its set for 104 and the pump will not cut on what is the problem You may be in economy mode. Economy only heats the water during a programmed filter cycle. You want it to be in ...

I have the big ez spa I cannot get the SL setting to change and stay on anyother setting. Hi as you know you are in the Sleep mode of your pump and filter settings. To change the setting to a ...