Question about Dream Maker Spas Dream Maker Ez Spa Hot Tub

1 Answer

Was sitting in the tub trying to make it hotter I was thinking ... Do you have to be out of the tub with the cover on to make it get hotter or Can you sit in it & enjoy while it is heating up And I did switch it to standard mode and the temp would not go up

Posted by firehawk924 on

Ad

1 Answer

adam hudson

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 310 Answers

Most dream Maker Spas will not heat when the jets are on HIGH speed.

Posted on Jul 12, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Found water in the pan under bottom of my 60 gal Rheem Marathon model CMR 75245 electric hotter tank. There is no other source of water goes in the pan. Tank is only 4 yrs old. Is the tank leaking?


Is it sitting in the pan or is it elevated over the pan? It is hard to see the leaking if it is sitting flat in the pan. Check all the connections, top and bottom. Wipe them dry and then run your hand over the connections and feel for water. Also check under the heating element covers for leaks. Good luck!

Dec 07, 2016 | Rheem Water Heaters

1 Answer

How do I relace the drain flapper valve (528625P) on the bottom of the upper drawer in my Fisher Paykel 603?


9.9.1 Remove the drawer front
9.9.2 With the tub opened release the tub clips and push back the
drawer rails.
9.9.3 Carefully release the four wiring cover clips from the front
lower section of the tub taking care not to damage them.
9.9.4 Release the three clips on the underside of the tub which
retain the wiring cover.
9.9.5 Pull the tub fully open and lift it up at the front (this makes it
easier to remove the wiring cover from the rear of the tub).
9.9.6 The wiring cover may now be carefully moved forward to
release it from the rear of the tub.
controller.
.
9.10.6 Unclip the drain hose cuff from the motor assembly taking care not to misplace the non-return flap valve so you know where it sits.
Replace flap valve and refit in reverse order.

Not sure why you need to take the top drawer out if you have already got the bottom drawer out and only need to replace the valve in bottom drawer.

Apr 18, 2014 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Dream Maker Spas leak


This means one of your top jets is leaking. Firstly try Fix A Leak this will stop any leak up to an 1/8". If this does not help there will be more difficult work in store.
Each jet sits in a jet body, these jet bodies are behind the tubs shell, you'll need to get in behind them to see which one is leaking. This can be difficult as they are often covered in insulation foam.

Sep 05, 2012 | Dream Maker Spas Dream Maker Ez Spa Hot...

1 Answer

Only hot water makes it to the tub. I can hear cold water running. I can feel it traveling through the hose, but it does not get into the tub. Why (and where is the cold water going)?


hmm...so you're certain that the cold water is actually going in someplace huh? ok, try this...run it like you have it now...put your hand in the water flow and feel how hot or warm it is...now turn off the cold water and see if the hot water gets hotter...if it does,then try the opposite, turn off the hot water and see if there is still water coming into the tub...let me know what happens

Jun 10, 2012 | Maytag PAV2300 Top Load Washer

1 Answer

Need to know how to take the see through cover off under the top draw on the DD603 dishwasher to replace the drain hose on Fisher and Paykel


I think you are referring to the wiring cover at the bottom of the drawer. I will assume you know how to get the drawer out.

To remove the wiring cover
1. Carefully release the four wiring cover clips from the front
lower section of the tub taking care not to damage them.
2. Release the three clips on the underside of the tub which
retain the wiring cover.
3. Pull the tub fully open and lift it up at the front (this makes it
easier to remove the wiring cover from the rear of the tub).
4. The wiring cover may now be carefully moved forward to
release it from the rear of the tub.
5. To reassemble first ensure that the wiring harnesses, drain
hose and fill hose are clipped into their correct position.
6. Then refit in reverse manner

Please rate this solution if this is what you were after. Otherwise post a comment and fixya.com will try to help you.

May 22, 2010 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

Savannah spas


probably a dirty filter!! take it out turn tub off to reset turn back on with filter out and c if nthis solves problem if so replace filter.

Nov 20, 2009 | Qca Spas Jewel Series Topaz Plus Hot Tub

1 Answer

Water not heating up


run without filter to c if it heats up if it does replace filter

Sep 13, 2009 | Qca Spas Dream Series Dream Master Hot Tub...

2 Answers

Water is leaking from left rear side of Washer


that is the location of the vent and valves. suspect rubber hose from valve to dispenser is busted. remove top cover to see (2 or 3 torx screws on back) the older units had a bend in the hose that breaks.

Apr 26, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Hot tub not heating any hotter


It sounds as though the temp. sensor isn't operating correctly. The tstat may have the ability to turn the unit on and off but it may not be sensing the correct temp. I would have a service perfessional come out and check for a short and also that the tstat is operating correctly not just turning on and off. I wouldn't try and bypass due to safety concerns on a hot tub.

Mar 29, 2009 | Home

1 Answer

8074 vibrates furiously on spin cycle.Has done so since new.


Check suspension shocks and springs. undone back cover, should be 3 shocks attached to tub. remove top cover and check 2 springs attached to tub.

Jan 22, 2009 | LG WM1812C Front Load Washer

Not finding what you are looking for?
Dream Maker Spas Dream Maker Ez Spa Hot Tub Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dream Maker Spas Pool & Spa Experts

john h

Level 3 Expert

23523 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Tom Chichester

Level 3 Expert

61334 Answers

Are you a Dream Maker Spas Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...