Questions & Answers for: fan turning

Mircowave works, exhaust door opens, fan stop working Turn mircowave on to heat food. Heats up fine. Exhaust fan door open to vent but the fan does not come on, you can hear a humming or clicking ...

...fan relay also should be replaced. When turning the key only half way to make the dash fan work, indicates that the dash fan is okay. The dash fan may make a whining or high pitch noise when engage. ...

cooling fan hums and turns slow. I have a Whirlpool microwave HM3184XPS the cooling fan hums and turns slow. 1) it turns on automaticly 2) it turns slow 3) pushing the fan button turns the fan on and ...

my coolant is not working? when driveing it stays cool but as soon as i stop the fan dosnot kick in ad i over heat? The coolant is working well, because the engine stays cool while driving. The ...

honeywell chronotherm iv fan keeps running even Honeywell Chronotherm iv fan keeps running even when heat and cool turned off. How do I turn it off? To turn the fan off, press the "fan key" until it ...

...to the radiatior. Anything stuck in the cooling fins to cause a blockage. Also check the cooling fan to see if it is working properly. To check the fan (while engine is cold) turn the blades on

Our attic fan hums every 10 minutes or so but the fan never turns on. I'm assuming there might be a problem with the fan motor (the fan is 8 years old). I tried to turn off the humidostat (in the ...

fan turning , but soon as you push the off button or the fan button the display shows that the fan has been turned off but the fan is still blowing . I can change the temp etc but just cant dissengage

Casablanca fan with light, when I turn the power on at the wall, fan turns on high, but does not respond to turn on light or change fan speed. Wall remote is wired. when I turn the power on at the ...

...fan is barely turning, it could be the fan is bad. This fan blows air across a 2 coils. your fan is seized up. If you feel it, it is probably hot hot hot too. You need to replace the fan.. sorry! ...