Questions & Answers for: Wurlitzer edge 100

it isn't you need to put money in it. Does the record carousel turn when you press the latch on the edge of the carousel? (It's at 5 oclock). Dave

...is a small lamp at about 6 oclock on the rim. This is for the sensor which counts the teeth at the edge of the carousel. If this is dead the machine can't find the home position so the carousel

...all the springs on it is the selection mechanism. There is a rotating disc with teeth along the edge, powered by a motor, which rotates to the correct position before a solenoid is fired to 'pop' ...

...reset is three small spring loaded prongs (assuming I am imagining the right machine) around the edge of the centre hub. Check they are not gummed

...speaker wire under it. What you are describing though is different. (Are they on the speakers?) The edge of the rectangular bit presses down, then you push the bare end of the wire into the hole and ...

...100-Disc CD Changer: The turntable that holds all the records will cont... The turntable that holds all the records will continuously turn when a selection is made. It will not take the records over ...

...bulb light called the "light gate lamp" which you should be able to see shining at 6 oclock on the edge of the record carousel. It is on the lip where the serated toothed edge of the carousel passes ...

the carosel turns constantly and wont pick out any discs There is a small lamp on the edge of the carousel at 6 oclock. Or in your case...there isn't. :) That counts the carousel position and as it is

...is a K99 it comes off by loosening the two nuts at the top then flexing it and popping the bottom edge off. If it is a Compact amp you can see the

...edge connectors. The bottom right connector will look bad but that is just the general illumination for the playfield and head. If you have a VOM then you should check for the plus 100 and minus 100 ...