20 Most Recent Wurlitzer Jukebox 1015 One More Time 100-Disc CD Changer Questions & Answers

The arm picks up cd and places it on table, pauses

I am having the same issue. Please email e when you find the solution to fix it. [email protected]

Wurlitzer... | Answered on Apr 13, 2019

The fuse keeps blowing out after a while my jukebox that is connected with the wallbox is turned on... maybe after 3-4 hours. any suggestions?

It could be caused by the wrong fuse type being fitted. A fuse blows due to an overload. But some overloads can be of a short nature. The surge when something is switched on for example. A fuse which is say a quick blow type would therefore go straight away.
It could also be a fault (on the wallbox) or a bad connection between the wallbox and the jukebox.

Wurlitzer... | Answered on Nov 18, 2018

How do i replace the cd laser on my wurlitzer omt

Unless you have specialized equipment to align the laser, do not try to change the laser. That being said, when I have problems with a CD juke that I track down to the player, I change the whole player (the silver unit about 4"x6"). Enco systems .net has new and rebuilt CDM-pro players. If it as older one, other places rebuild them. Enco has a list of player symptoms on their home page to determine if you need a player.

Wurlitzer... | Answered on Aug 02, 2018

The 'duck bill' bracket on the shaft near the gear box- where can you get a replacement?

Wurlitzer... | Posted on Jan 08, 2018 | Be the first to answer

Power it up and the amp gives a nice thump everything lights up ok but the carousel runs and the display is blank. the toc reader z is blinking but the m led is lit on the s&cc pcb so is possible

gamesmedic.freeforums.net

Wurlitzer... | Answered on Dec 21, 2017

I have a OMT Wurlitzer Jukebox, the CD unit is not

Wurlitzer... | Posted on Sep 23, 2017 | Be the first to answer

I need a wr-18 remote

Wurlitzer... | Posted on Sep 02, 2017 | Be the first to answer

I hooked up RCA cables from the jukebox output to the Aux input of my receiver so I could listen to the music though my outside speakers, but no sound, any suggestions would be great. thx

Wurlitzer... | Posted on Aug 18, 2017 | Be the first to answer

Someone to repair a Wurlitzer 1015 withing

I may be too far from you to drive, but many times I can help with problems over email or the phone. I can repair any part inside of Wurlitzers. Please email [email protected]

Wurlitzer... | Answered on Dec 28, 2016

OMT Gripper Issue

There's a spring wound round the shaft of the rod that drives the gripper gears. Oil very lightly. The gearbox rotates when it puts the arm back but the arm is held against the driving part by this spring so if it is sticking the arm will not turn over properly even if the drive shaft is doing what it is supposed to.

Dave.

Wurlitzer... | Answered on Dec 21, 2016

How do you turn the volume down on a one more time

There is a volume control on the back, unless it is missing. The newer ones also have a remote like a tv.

Wurlitzer... | Answered on Dec 08, 2016

Error code 71 fire bird , works fine for a while then intermittently get error code 71

Wurlitzer... | Posted on Nov 27, 2016 | Be the first to answer

Wurlitzer 1015 omt cd arm will not move to play cd.

you need the service manual

Wurlitzer... | Answered on Sep 07, 2016

Wurlitzer 1015 OMT Disc spins, then stops....

When the disc is taken from the carousel and put on the player how long does it take for it from the time it is placed onto the player to being returned to the carousel? Also is the cd spinning when its on the player or not spinning at all. The answers to these questions should help in pinpointing the actual problem.

Wurlitzer... | Answered on Sep 06, 2016