Questions & Answers for: Buick Rendezvous control lock

Question about 2002 Rendezvous

2 Answers

...function properly. I disconnected the battery and reconnected it to try and force a reset of the control system. Nothing is working. 90% probability you gave a ground wire issue at your fuse/relay ...

Ad

Question about 2002 Rendezvous

1 Answer

...communicate would be the first step in diagnosing this problem ,also checking codes an to see if the scan tool can bidirectionally control the lock's window's etc.. I would suggest a buick dealer

Ad

...control module (BCM) • Driver door lock switch • Front passenger door lock switch • Door lock actuators in each of the doors • Door lock system fuse into the BCM (BCM D 25A fuse) BCM Functions The ...

...lock and tumbler assembly. Once replaced the new key will have to be recognized by the body control module through a reset procedure. Close drivers door. Turn ignition to run position and wait for ...

Question about 2003 Rendezvous

1 Answer

is on it indicates a problem exists in the system and the control module has turned on the warning light and disables the anti lock brake system. You need the dealer to scan the system for fault codes

Question about 2005 Rendezvous Ultra

0 Answer

...lock and unlock. If so, then your actuator is indeed bad. If not, and start checking the wiring back through to the body control module and then the fuse block. If you don't find any raw or broken ...

door locks, radio, pwr windows etc. You'll probably have to take it to the dealer to have the body control module(s) reprogrammed. The radio will require a separate reprogramming operation

Question about 2002 Rendezvous

1 Answer

...lock cylinder is the theft deterrent control module an antenna ! The vehicle theft deterrent (VTD) system functions are provided by the theft deterrent control module. The VTD system prevents vehicle ...

Question about 2002 Rendezvous

1 Answer

...it won't lock again. Please help Could be the latch in the gate. Could be wiring, they tend to break at the top of the gate where the wires goes into the body. Also could be the body control

...lock control circuit to voltage. Since the lock actuator unlock control circuits are at ground potential within the BCM, the door lock actuator motors transition to the Lock position. Driver Door ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...