Questions & Answers for: connect to mains Cooktops

Question about 23 in. ZKT641H Electric Cooktop

1 Answer

...this a wiring issue or do I have a faulty hob? this is almost certainly a wiring issue at the mains connection block, there are links which have not been tightened down. there is usually a diagram ...

Ad

Question about 23 in. 67600KF-N Electric Cooktop

1 Answer

...reset button or user acessable fuse in the manual. The only thing left to do is check the main wire connection underneath the hob - if it is accessable. (switch off at the wall first!) Assuming you ...

Ad

Question about 23 in. 67600KF-N Electric Cooktop

1 Answer

...replace an old ccok top with an oldish electric chef with solid hotplates. There are 4 wires connected to the Chef, 1 green [presune earth] and 2 white and 2 black wires, and only 3 from the ...

Question about 23 in. 67600KF-N Electric Cooktop

2 Answers

...mains cable to just to use the hob alone? If i needed to conect a Double oven, can i conect it into the same box ? and do i have to conect any straps to the other terminals? the usual method is to ...

Question about 23 in. 67600KF-N Electric Cooktop

2 Answers

when i turn on any ring on my hob it triggers the fuse box. can i fix it just a thought - check the connection block where incoming mains connects to the hob. these quite commonly burn out not so. the

Question about Millennia ETT365 Electric Cooktop

1 Answer

Top right burner will not work Dacor ETT365 Touchtop - Top right burner does not heat up. There is no response from the touch sensor when trying to to turn it on. The up and down sensors beep when ...

Question about 30 in. NET7452UC Electric Cooktop

1 Answer

...on red, white, green, yellow? hook the red and yellow off the new stove to the two hot phases-then connect the white on the new unit to the neutral power connection and finally the green wire can ...

Question about 30 in. NET7452UC Electric Cooktop

1 Answer

one burner is not working The heat and pressure sensor is worn out! Be ready to perform the below type of work to fix the old one. Generally what occurs is the units soldered connections on the main ...

Question about White Westinghouse Stove Range Stove 8" Surface Burner Heating Element 316442300

1 Answer

...door lock. Is Door Lock Getting Power Supply? Check Control Thermostat F3 - Self Test Error Disconnect Appliance from Mains Supply, Wait 5 Minutes and then Reconnect to Mains Supply F4 - Shorted ...

Question about White Westinghouse Stove Range Stove 8" Surface Burner Heating Element 316442300

1 Answer

wont self lite?? no snapping sound Four possible causes: First it hasn't been connected to the mains, some ignition systems work on the mains sockets, if it's is plugged into the mains it could be the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...