Questions & Answers for: Peavey connect eq mixer

Question about CROSSOVER, STEREO 2-WAY/MONO 3-WAY, XLR, LOW-CUT FILTER => Model VSXII Car Audio Amplifier

Peavey Compressor/Limiter and Peavey 3/4/5w Crossover

...connect this to our system. My idea is from main out mixer to Compressor then to EQ then to Crossover then to amplifier. is my idea correct? Another thing is i don't have idea how to adjust De-esser ...

Question about XR 1220 Powered Mixer Mixer Powered

1 Answer

I have a peavey 1220

...EQ. Connect the subs to the left or right channel and the tops to the other and use the EQ to remove the bass from the tops and vice versa, pan everything dead center. Obviously this sacrifices your ...

Question about XR 8600D Powered Mixer

1 Answer

Hi i have an Allen and Heath ZED 22 with no

use "effects send" into the effect but connect the effects output to an unused channel on the board. Using this scenario allowed EQ adjustments to be made before mixing it out to the amps and speakers

Question about Xr 8600 8 Channel Powered Mixer

1 Answer

With Main/Mon switch (Power amp Mode) depressed, one speaker connected to Main, second speaker connected to Mon, Main speaker has muffled sound.

With Main/Mon switch (Power amp Mode) depressed, one speaker connected to Main, second speaker connected to Mon, Main speaker has muffled sound. Mon speaker sounds great. Switched speakers and cables ...

Question about 32fx USB 32 Channel Mixer

1 Answer

How do i update the firmware and is this may be the cause of the USB b not recognizing any memory sticks that we've tried?

...EQ with sweepable mid-frequency and variable low cut filters 2 stereo channels with dual mic/line inputs 48 volt phantom power 6 Aux sends 4 subgroups 100mm faders Double the processing power of the ...