Questions & Answers for: Broan-NuTone how do you clean the filter

filter light on Problem My filter light stay on at all time, I cleaned the filters and disconnected the fan to cancel the "problem" , the light went off but as soon as I started the fan again the ...

How to clean the blower wheel/housing Can I remove the clevis pin holding the blade assembly so I can remove the blades for cleaning. I have tried to do it while it's still in place and there is no ...

...filter? will come on when it is time to clean your grease filters or check your non-ducted filters. After replacing the cleaned, or new filters, press the ?filter? button to turn off the indicator ...

...this filter is a white dounut shaped one that is directly above the bag. this filter should be cleaned every time the bag is changed. there also may be a clog somewhere but

...container or a dirty filter. look inside the container up by the motor for a filter that can be cleaned or ...

We have a Broan Eclipse downdraft vent system. How do we remove the filters to clean them? In the front, right behind the stainless steel section put your hand there. You will feel a plastic tab. ...

believe that's the "change or clean filter" indication. Clean the aluminum filters in the dishwasher, replace the charcoal filters if non-ducted, press the fan light over 3 seconds and it should reset

clean the filter bag while in place. 2) Wrap a trash bag around the bottom of the canister with the dirt can removed. Tighten the trash bag around the metal can and smack or shake the filter bag. This

light button blinking why The fan light switch blinks when it is time to clean the filter. Clean the filter, then press and hold the switch for 3 seconds to reset it.

...that is holding the bag in place. Once the bag collapse into a C shape, the bag can be removed and cleaned or replaced. The same technique is best for re-installing the new or cleaned bag. Check out ...