Questions & Answers for: how to change a clutch ATVs

clutch remains engaged at idle Have to turn bike off to change gears What model ATv do you have

...Idles about 1500 have to take it to 3000 before it moves. Why Probably worn clutch rollers but could be a worn belt I would change the belt first Sound like a clutch problem or belt is wore ...

why do I have problem shifting my transmission out of gear problem getting out of gear May need fluid changed or clutch adjusted

engages on its own wither if in reverse or drive is this a wet clutch so low or dirty fluid needing changed

how to adjust the clutch on a 1988 kawasaki mule belt squeal when you take off on it The belt is too loose, pulleys could be worn. the driven clutch can be adjusted by changing the shim.This requires ...

...off the throttle going downhill, it nears throws me over the handle bars......is there an adjustment? No there is no adjustment, you will have to either change the clutch or the bearing in the ...

I change my drive belt and my atv still won't move Could be your wet clutch is screwed.

...for several reasons.... the part is different mechanically, a different color, the model year changes.. BUT - You cannot assume because the numbers are CLOSE that they will interchange... there ...

My 2000 Prairie loses power goin up hill and starts to put wen throttle is fully pushed ..could this be cause belt is loose and should I change spark plug It could be a bad clutch

2011 Polaris 500 Ranger EFI. Sticks in gear, sometimes I have to shut it off to change gears. Check the clutch is dissengaging correctly.