- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
That's a possibility. Disconnect the fuel intake hose near the intake manifold, switch the ignition On, if no fuel comes out of the hose, then you have a faulty fuel pump.
you have a reverse safety like on riding mowers with deck engaged push and hold reverser button this link showes where and how it works --against bypassing a safety only video that showes the safety clearly 1995 Polaris Magnum 425 ATV Others Disable Reverse Override Function
www.manualslib.com > ... > 325 MAGNUM 4X4 HDS A00CD32FA View and Download Polaris 325 MAGNUM 4X4 HDS A00CD32FA parts manual online.Polaris Automobile Accessories Parts Manual. 325 MAGNUM 4X4 HDS ...
Some times the four wheeler is not in right position for 4x4 to engage safely so it throws it in to safety mode so it don't slam in to 4x4 with grindage an damage that's my experience. If it seemes to work fine when working run it . . Could need service,fluid change and 4x4 actuators,.,vacuums switches tested also ...
If I remember right it does the little black box (not the CDI box) the 330 I replaced the control box on once i replaced the box the speedo did light up again been along time ago but I think if you repalce the control box it will fix your problem
You need to inspect all gas lines for obstructions including the gas tank , and especially the carb. I can bet dollars to doughnuts that it's a fuel problem something is blocking the fuel and by rocking it it's allowing the fuel to go through. hope this helps , let me know how you make out . Adam J
OUCH.. I hope you got it cheap... sorry.. You are going to have problems until you get the wiring straightened out completely..and by a Factory Trained Professional... I know thats expensive.!! The other alternative is to pass this machine on to someone else.(yikes) ... and take the money you would have spent on repairs and purchase a new(er) one with NO issues.. when you go look at another machine, take someone with you that knows ATV's..or take it to a shop for a full check-up!!
×