...center button on side of watch, then touch the crystal in the center to cycle between time, date and 24H Fft (which I think is the units). When on 24H... push and hold the center button on the side ...
...button, and then twice in the center of the screen, so that the digital display shows either 24h Cm or 12h... u get it ) Once in that press and hold the middle button for 5 seconds, until the display ...
center push button till beep, cycle to hrs/deg, then hold center push button til beep and synchro shows) I figured out the difference in time on hands and time on digital and lined up both times. Then
...center crown 4. Watch will beep and word (SYNCHRO) will appear in the display. 5. Use the top + button to line up the minute hand right on the 12. 6. Use the bottom ? button to line up the hour hand ...
...center of screen until date appears 3. Press and hold top + button until watch beeps and display flashes. 4. Use + and ? buttons to change date to correct one. 5. Make sure to set time first, if you ...
...button 2. touch center until you see the 24h/units 3. hold down T for 5 seconds until you see "Synchro" in the LCD. 4. use the + button to move the long hand to 12 o'clock, use the - button to move ...
...button to to switch to minute hand adjust) Press the lower pusher (-) to advance the minute hand until it is also positioned exactly at 12:00. When both hands are aligned together and pointing ...
Question about T-Touch T33159851 Wrist Watch
...center button is to activate the setting mode. 2Press the center button in for one second. The watch will beep. 3Press the top "+" button for two seconds. After the watch beeps, you can begin setting ...
Question about T-Touch T33159851 Wrist Watch
...center button for 5 seconds until a synchro appears on the data screen, then start pushing top button to move the minute hand to the 12:00 then push bottom button to move minute hand to 12:00. after ...
...center button marked "T". The watch should beep once;- Touch the center of the touch-sensitive face until 24H Cm appears in the digital LCD display; - Press and hold the center button marked "T" for ...
Usually answered in minutes!
91 Questions
65 Questions
17 Questions
11 Questions
10 Questions