Questions & Answers for: Chevrolet Tracker camshaft sensor

...camshaft postion sensor seemed to help. also check the vacum line to the fuel pressure regulator to see if it has oil or gas in it-if it does replace it. also check the catalytic converter-mine was ...

Ad

...camshaft sensor. Also, when I give the tracker gas I get a bad odor similar to ammonia. Had the same problem with my tracker. Replaced the camshaft position sensor(easy to do yourself, takes about ...

Ad

...Camshaft Position Sensor Circuit Fault'. Replaced the camshaft position sensor to no avail. Wiring appears to be OK. Does this motor have a timing belt? Is there any way to narrow this problem down? ...

...camshaft sensor wouldn't explain the clattering noise. But a timing chain would explain both. Clattering from a loose chain and the camshaft sensor code from when the chain broke and the camshafts ...

Question about 2000 Tracker

1 Answer

...camshaft sensor both mine were bad . Next have the ignition checked with a computer if at all possiable there is a anti theft device on it that can go out mine did. And lastly is the ecu or computer ...

Question about 2003 Tracker

1 Answer

Sensor. My son poured water on the Idle Control Valve and it started up immediately. Makes no sense. What is your opinon. Not sure why you are thinking camshaft position... I am thinking maybe a relay

Question about 2000 Tracker

1 Answer

sensor located It's bolted to the back of the cylinder head (right side when facing engine) inside a casing For a full rundown see here: http://www.justanswer.com/chevy/4uspf-chevrolet-tracker-4x4

Question about 2001 Tracker

1 Answer

...start back up i put a new camshaft position sensor on it and its ok now the sensor cost me 289.00 dollars its easy to put on takes maby 5 minutes if u put that sensor on it u wont have anymore ...

Question about 2000 Tracker

1 Answer

camshaft position sensor you need to do that sounds exactly like my problem got the new fuel pump and filter in there and it was fine for a month then same thing started happening again, been fine for

...just a guess. Check for trouble codes first. Ignition module or coils may be heat failing. It's either crankshaft or camshaft sensor. Once it warms up it breaks down and won't start until it

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...