Questions & Answers for: broken iron

broken/worn insulation on the wires of the iron cord ... though as it's new, I would doubt this). Are you using an electrical extension lead to plug the iron into? If you haven't overloaded the socket

iron worked fine. Today I plug it in and the light comes on but it WONT HEAT no matter where I put the setting. Is it stuck on auto shut off? How can I get it going again. It is almost new and has not

...IRON NEVER HEATS UP Hi. Either wiring is broken or the heating element is broken. The heating element is tested taking apart the iron, disconnecting element contact, and reading impedance on element ...

...iron wont turn on how do you change a broken cord? if the cord is broken get anew one, cut of the part that is broken attache the wires in this order red to red or brown {live} black to blue{nuetral} ...

...light on the iron lights, but there is no heat. Check and test this possible fault: - Blown fuse - Faulty or broken thermostat - Broken power cords - Broken heating elements Hope

...14977Z The iron's red light is on but won't heat to iron. was working a couple of hours ago This is typical of a iron, it is cheaper to replace than to repair. The heating element is

.....if you have power going to the iron then take apart the iron and check the connection inside of the iron because it sounds like the wire is broken and not getting power to the iron.Please rate ...

...broken wire. Plug the iron in and mover the cord around. See if you can find the broken wire. Typically where the cord comes out of the iron and right at the plug. Or replace the whole cord. Your ...

...iron potion broken and will not hold steam can you replace the iron part More than likely your steam valve is broken or stuck. I had one of these and they are worth having repaired. Google Rowenta ...

...iron fell down and top part is broken can it be replaced Rowenta Iron Parts - eReplacementParts.com www.ereplacementparts.com/rowenta-iron-parts-c-180639_180647.html Fix your Rowenta Iron today with ...