...changed in that set in vertical circuit i usually change about 5 caps to cure the problem caps go bad over ...
Check for rings around the pins if ICs and transistors that are mounted on a heat sink. And use a cap checker to find the bad cap...there should be one or two to replace, but you will search and find
Question about Viera TH-50PZ80U Plasma TV
...about 1 second after you turn it on. What could be wrong and an average price to fix it? It can be bad power supply or shorted circuits in the sustain boards which will cause the power supply to go ...
...problem with my 42 in Philips LCD HDTV. Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors on ...
...TV are the power supply module, Y and Z Sustain boards. I would inpsect all those 3 modules for bad caps, blown fuses, burnt parts first. Learn about bad caps: ...
...flashes but wont turn on , will work after blowing hairdrier over back of tv That is the sign of bad caps, open up the back and look at the caps in the power supply, when caps have high ESR, the ...
tv turned off, red light flashing, not turning back on The power supply module may be bad due to bad caps with domed tops, or it detects shorted circuits so it stays in the safety shutdown mode. You ...
red button flashes on tv and won't turn on power supply unit problem you have bad caps (capacitors) change all the caps or atleast the onces they leaking how do you see if they bad usually they are ...
...by the main board). You need to find out if the 5vdc standby power supply is working or not first. Bad caps can look normal but can have high ESR, but not likely to be bad caps in PANASONIC because ...
...bad cap is to grab them with the hemostats and squeeze, once the hemostats have a good grip of the cap start spinning the cap, dont pull just spin.you are trying to break the leads. once they break ...
Usually answered in minutes!
627 Questions
462 Questions
520 Questions
406 Questions
457 Questions