Questions & Answers for: 42fd9954 power board

...to green when powered but there is no light on the screen and the indicator light goes back to red. could be a y-sustain board, av board or power supply board. i would think y-sustain if i had to ...

...42FD9954/17S Plasma tv set that has no picture. The set cannot be turned on by the remote or the power switch. The light at the power switch does not come on red or green. I have opened the back of ...

42FD9954 philips plasma TV flashing LED it wont come on Hello I have a 42 in plasma TV but when I turn it on the LED light will go green like it will come on then after 7 or 10 seconds it will start ...

overheat" and go bad. Most likely you have a problem with the power supply board. You can repair power supply board at ebc electronics , If you are in NJ a house call/in home repair is available. Paul

...42FD9954/17S Plasma tv set that has no picture. The set cannot be turned on by the remote or the power switch. The light at the power switch does not come on red or green. I have opened the back of ...

Power cannot start red led blinking philips plasma 42FD9954 Check the power board for caps with the tops bulged up. 3300uf 10v.

...power supply board is about $179.00, most of the time it can be repaired, just look for bad capacitors first, it they are good then you have to replace the whole board. good luck ...

...power supply board and checked for bad soder joints.lookes good. Check all the capaciotors in the power supply board for bulges up or little puffs up.Change these capacitors will get ur power back to ...

...Now it is totally blank. Can anyone tell me where ot get power supply for this Philips 42 Flat Plasma TV 42FD9954/69S Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply

no lights and wont turn on. cord is good. 120v all the way through into the circuit board The main switching power supply section circuit [SMPS] is faulty. Check and replace it.