Questions & Answers for: JVC 1 5v

...is this not the fault Please help. check power cables to dvd and hd. voltages should be 12v,gnd,gnd,5V with and without load. if voltages drops with load then fault is probably with caps. I changed ...

...supply me with details of the modifications required?Cosmic voltages on CN5303 should be 12V and 5V. I found 5V to be2,5....3V.Check input of regulator MM1665A(should be 6V). If 6V ok,remove ...

...STUCK AND HAD TO BE RELEASED MANUAL.SINCE THEN THIS PROBLEM HAS OCCURED.ON CLOSE INSPECTION .THE 5V SUPPLY TO BOTH DVD AND HDD ASSY WASDOWN TO ABOUT 3V.I SUSPECT THE 5V PSHAS SUFFERED DAMAGE? Yes ...

...recent power cut Have left it on over 24 hours but still keeps flashing ''loading'' Measure the 5V line on the DVD drive,if to low replace the bad caps in power supply.There is an 22 microfarad ...

I have a problem, my system not turn on. The system don't supply 5V. What can i do? You may have had a power surge that took out the fuse or damaged the standby power supply.Look for burnt or damged ...

where does the remost wire go ? Remote wire is wires to an amplifier. It produces a 5v signal so your amplifier turns on. If you do not have an amplifier - the wire is not used. Thanks for using FixYa

...would be greatly appreciated. It will be one of the transistors that regulate the lower volatges (5V, 12V...)I ffixed mine. the heatsinking on those transistors is pathetic, and its no wonder they ...

...it for bad (cold) soldier joints, bad capacitors, and lastly, to use an Osilliscope to test the +5v and -5V transistors on the board.  If they can't diagnose the board, they can use the ...

...JVC Wireless Headphones (model: HA-S20BT) do not want to charge when connected to a USB port or 5V adapter. Any suggestions would be appreciated. I recently bought JVC Wireless Headphones (model: ...

...Hope someone can help. Thanks a lot in advance. Dont charge with the Laptop. always use separate 5v USB charger like the one you have for the phones normally to charge the ...