I need a telephone number to speak to someone at giani bernini handbag company right away..my expensive handbag's leather straps are falling apart and its not even 1year old..I believe you stand behind your quality products and will take care of my problem

From the Eldredge to National to the Janome Sewing Machine Company

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=12&ved=0ahUKEwjuiL25hvvXAhUR9WMKHXB4Bc8QFghMMAs&url=http%3A%2F%2Fwww.conniesue.com%2FSEWWhatisitWorth.pdf.pdf&usg=AOvVaw1V4zVT8ZqeOaqSVp0FGRLx


Thread Antique Eldredge sewing machine

The Improved Eldredge Rotary Sewing Machine

National Sewing Machine Company NBWiki

NATIONALSewing Machine Company

you would have to contact the place you got the handbag from and talk to them about the problem with the handbag

Any sewing repair shop will have, or can get the leather treadle belts. They come in one size and you cut them to fit your machine.

check the needle holder if its tight enough not to fall out. now if your needle gets stuck, try using another needle appropriate for your material. if your problem persists, the problem might be on how do you attach your needle. try attaching in reverse side.

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.

I'm a leather worker, but I'm afraid there is no solution to this other than to wear a like a sock or something with these boots. Once it's stretched... it would take some serious measures to make it go back... often with disastrous results.

Ok. Depending on the thickness... garment weight leathers can be sewn with a domestic machine... Most often an even feed foot (the home version of a walking foot) is needed. You will likely need a larger leather needle and somewhat longer stitches than you would normally sew.

As for stitches looking messy on the back that is a top tension problem... you'll need to tighten the tension until that goes away. AFTER you have made sure you have your machine threaded correctly with the presser foot in the up position.

As to your question about leather, the 6460 has a special stitch for sewing leather. Select Colormatic cam C and install in the cam hole at the back of the machine. To remove/add a cam turn the upper left hand dial on the front of the machine to the small dot. This disengages the cam. Gently remove the cam by pulling straight out from the back of the machine. Install cam C straight in, ever so slightly twisting it back and forth into the hole to find the sweet spot. You'll hear a click when it's all the way in.

To use Viking's leather stitch, turn the upper left dial to the color yellow. (Note: The slash line on the upper left dial is a stop. You can't turn past that point. Go in the other direction to get to the icon or color you want.) Turn the upper right and bottom right dial to yellow also. The upper left dial is what selects the particular stitch on the cam, the leather stitch in this case. The upper right dial selects stitch length, and the lower right dial selects stitch width. You can move the right dials within the color range. Experiment on a scrap of cloth to get the stitch size the way you want it. The leather stitch looks like a straight stitch with a block style edging to the right of the straight stitch. This is supposed to give a stronger stitch to the leather rather than a straight stitch by itself.
If you don't have the manual for your machine: Select which of the eight cams you want to use. All the cams are removed/installed by turning the upper left dial on machine front to the small dot. At the rear of the machine, pull/insert cam straight in or out and twist slightly as you push in or remove to find the sweet spot. Move the dial away from the small dot to lock the cam in.
Turn upper left dial to stitch type you want and match the other dials to that same color. Upper right controls stitch length, lower right controls width. Bobbin tension is controlled by the dial at front left of the machine, above the needle.
Cams A-C are the workhorse cams and the rest are embroidery stitches.Straight stitch, button and stitched zig-zag will work on any cam. These stitches do not rely on matching a color code. To use those three: To select straight stitch, on the upper left dial, choose the icon that looks like a buttonhole with a zig that trails off to the right. Select stitch length on upper right dial and turn the lower right dial to zero, going by number rather than color.
To select stitched zig zag, turn upper left dial to the broken zig zag icon (to the right of the straight stitch icon). Select stitch length and width.
To move the needle to the side for buttonhole stitching or other times when you want the needle off center, turn the upper left dial to the button icon. If stitching a button hole, set stitch length to zero and lower right dial to desired stitch width. Push in the small white button that's beneath the lower right dial in order to prevent the feed dogs from moving the fabric forward. Pushing that button in is also handy for putting cloth under the foot before sewing as it prevents snagging and is used for tacking.

I'm also trying to contact Giani Bernini Handbag Compay. The strap broke. karla in ohio

check settings