- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi Linda.
Unfortunately I cannot email you directly on here but I have found a direct link to the manual you need.
Innovage touch-panel / caller-id phone manual
This will download a PDF file which will open as the manual for your phone.
I hope this helps
Regards
Mike
Here are some codes from Directv that should work with that remote and television. 10171, 11326, 10463, 10150, 10154
If you still need help trying to program your remote please feel free to cantact me by phone @(361)510-0339 my name is Jonas and I am a Directv Installer/ Techniciain Specialist
Depending on how the private lines were programmed, you need to pull the ringing out of DIL 1:1 if it was assigned and put it into DIL 1:N. Look at programs 407-8 and 603-4.
Each phone needs it's own set of wires to the main control unit. You cannot use splitters or connect a new jack up to another jack like home phones can. Do not connect your phone directly to the phone company's phone line. It will not work and a ring signal will break your phone.
The phone you have (kx-t7431) can work on one of several different Panasonic phone systems so your first step is finding out which model control unit you have.
Some of the smaller systems you can plug phones directly into them but the larger systems need a phone jack terminated at a punch down block.
Once connected your phone should work with the default settings. If you need it to ring at special times or with special phone lines then you'll have to do some system programming.
If you want to tackle this yourself you will probably need to obtain an "installation & programming" manual for your specific system.
You have to set them on the main base for 20 seconds to have them register again. I am having problems with mine. If two phones are up at the same time one won't work. It says unavailable.
×